Permatex® Rust Treatment
Provides one-step treatment that destroys old rust and prevents new rust.
Just brush or spray on. Within minutes, rust is replaced by a durable black
polymer coating that may be painted. Excellent protective primer. Specially
formulated to be used with body filler and fiberglass. Can be used when
temperature is between 50°F and 90°F (10°C and 32°C) and on surfaces
which do not exceed 200°F (93°C). Aerosol - Level 2
Suggested Applications: Destroys rust on all automotive applications;
trucks, trailers, storage tanks, pipes, valves, fences, guard rails, bulkheads,
overheads, decks, hatch covers (topcoat with appropriate marine paint),
agricultural equipment, plows, tractors, snow removal equipment, etc.
Suggested Applications: Destroys rust on trailers, storage tanks, pipes, valves, bulkheads, decks, hatch covers (topcoat with appropriate marine equipment, plows, tractor)
Suggested Applications: Destroys rust on all truck applications; trailers, storage tanks, pipes, valves, agricultural equipment, plows, tractors, snow removal equipment, etc.
16 oz. aerosol can, 10.25 oz. net wt.
DIRECTIONS: 1. Use gloves to prevent staining of
hands. 2. Scrape or wipe off dirt & oil. Sand with
coarse sandpaper or wire brush. 3. Should be used
when temperature is between 50° and 90°F (10°
and 32°C). Can be applied to surfaces which do not
exceed 200°F (93°C). 4. Shake well before using.
Spray a thin coat onto rusted surface 8-10 inches
away until surface is lightly and evenly coated.
5. Apply 2-3 thin coats, allowing no more than two
minutes drying time between coats. Final application
should dry to a black finish. 6. Allow 24 hours drying
time before topcoating. Water based finish topcoat
paints will require an additional non-water based
primer prior to aplication of topcoat. Protect from
moisture and humidity. For a smooth finish, sand
with 320 grit sandpaper before topcoating. 7. Clean
up with alcohol.