Permatex

Permatex® High Temperature Anaerobic Flange Sealant

Overview

A high temperature sealant specially engineered for making or dressing gaskets in rigid assemblies. Able to withstand temperatures to 400°F (204°C), fills gaps up to 0.020” (primed) and permits clamping loads to be maintained for strong, leakproof assemblies.



Application

Automobile

Suggested Applications: Water pumps, thermostat housings, engine cases, timing covers, transmission pans, transmission case covers, and transaxle casings.

Instruction

TO MAKE A GASKET:



  1. Clean both flange surfaces. Remove paint, dirt, grease or old gasket completely.

  2. Spray Permatex® Surface Prep™ activator on one surface only. Allow to dry 1-2 minutes.

  3. Apply a continuous bead of sealant to the unprimed surface.

  4. Assemble mating surfaces with minimal lateral movement. Excess sealant can be wiped awaywith a cloth and shop solvent.


TO DRESS A GASKET:


  1. Clean both flange surfaces. Remove paint, dirt, grease or old gasket completely.

  2. Spray Permatex® Surface Prep™ activator to both flange surfaces. Allow to dry 1-2 minutes.

  3. Completely cover both sides of the precut gasket with sealant.

  4. Place coated gasket on flange, and assemble mating surfaces with minimal lateral movement.


US Part Number Canada Part Number Container Size Pack
51031 51031 50 ml tube 10
EnglishFrançaisEspañol한국어English