Permatex

Permatex® Gear Oil RTV Gasket Maker

Visión general

OEM specified. Specially formulated to withstand the harsh gear oil environment found in differentials and transfer cases. Because gear oil has friction modifiers that break down normal RTV and cause leaking, this specialty silicone has been tested to OEM specifications to ensure complete sealing. As a gasket maker, it seeks and seals leak paths that cut gaskets cannot. It can also be used to seal cut gaskets.



Solicitud

Automóvil

Aplicaciones sugeridas: Differentials and transfer cases.

Instrucción

DIRECCIONES:



  1. Para obtener los mejores resultados, limpie y seque todas las superficies con un solvente libre de residuos, como Permatex® Brake & Parts Cleaner.

  2. Cut nozzle to desired bead size – gaskets are best formed using a 1/16" to 1/4" (2 to 6 mm) bead.

  3. Apply a continuous and even bead of silicone to one surface; surround all bolt holes. Assemble parts immediately. Finger tighten bolts until material begins to squeeze out around flange. Allow to dry for one hour then retighten 1/4 to 1/2 turn.

  4. Silicone dries in 1 hour, and fully cures in 24 hours. Allow more time in cold or very dry conditions.

  5. Vuelva a colocar la tapa después de su uso.


Note: Not recommended for use on head gaskets or parts in contact with gasoline. Store below 80°F (27°C).
Número de parte de EE. UU. Número de pieza de Canadá Tamaño de contenedor Paquete
81182 31872 3 oz. tubo cardado 12
EnglishFrançaisEspañol한국어English