Permatex

Permatex® Gear Oil RTV Gasket Maker

Aperçu

OEM specified. Specially formulated to withstand the harsh gear oil environment found in differentials and transfer cases. Because gear oil has friction modifiers that break down normal RTV and cause leaking, this specialty silicone has been tested to OEM specifications to ensure complete sealing. As a gasket maker, it seeks and seals leak paths that cut gaskets cannot. It can also be used to seal cut gaskets.



Application

Voiture

Applications suggérées: Differentials and transfer cases.

Instruction

INSTRUCTIONS:



  1. Pour de meilleurs résultats, nettoyez et séchez toutes les surfaces avec un solvant sans résidus, tel que le nettoyant pour freins et pièces Permatex®.

  2. Cut nozzle to desired bead size – gaskets are best formed using a 1/16" to 1/4" (2 to 6 mm) bead.

  3. Apply a continuous and even bead of silicone to one surface; surround all bolt holes. Assemble parts immediately. Finger tighten bolts until material begins to squeeze out around flange. Allow to dry for one hour then retighten 1/4 to 1/2 turn.

  4. Silicone dries in 1 hour, and fully cures in 24 hours. Allow more time in cold or very dry conditions.

  5. Replacer le capuchon après utilisation.


Note: Not recommended for use on head gaskets or parts in contact with gasoline. Store below 80°F (27°C).
Numéro de pièce US Numéro de pièce Canada Taille du conteneur Pack
81182 31872 3 oz. tube, cardé 12
EnglishFrançaisEspañol한국어English