The Right Stuff® Red Gasket Maker is the only high temperature gasket maker that can quickly return a vehicle to service in just 1 minute. This thick formula maintains reliable and long-lasting seals. The Right Stuff Red 1 minute is superior to most OE gaskets and provides premium professional grade gaskets for today’s fast paced professional garages. Temperature performance up to 650°F intermittent, this gasket maker is sensor-safe and resists oil and other common shop fluids
High temperature performance and adhesion with a fast return to service time
Reliable and long-lasting seals
Sensor-safe, low odor and non-corrosive
Thickest formula available
High temperature performance up to 650°F (343°C) intermittent
Surfaces should be clean and dry. Cut off tip of cartridge.
Attach nozzle, cut at 45 degree angle at desired point and insert cartridge into a caulking gun.
Apply a continuous 1/16" to 1/4" (2 to 6 mm) bead to one surface, surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange.
Let dry for one hour then tighten to torque specifications. Allow 24 hours to fully cure before filling with fluids or returning to service.
To reuse package, leave 1/2" length of material extended from nozzle; cured material will form a protective plug. To reuse, carefully remove the plug and dispense as before.
NOTE: Not recommended for use on head gaskets or parts in contact with gasoline.