DIRECTIONS: 1. Clean and dry all surfaces. 2. Cut nozzle to
desired bead size, apply to one surface and assemble immediately.
3. Surfaces being bonded may need clamping for 1 hour or until
silicone is firm. 4. Trim excess after cure with sharp knife. 5. Silicone
“skins” and becomes tack free in 1 hour. Allow 24 hours for full cure
and maximum strength under normal conditions. Allow more time in
cold or very dry conditions. 6. Most paint will not adhere to silicone.
Surface should be painted first, then sealed. 7. Clean hands with
dry cloth or Permatex Fast Orange. Clean tools and clothing with
non-flammable cleaning fluid.