Tech Documents Search
Type the appropriate five-digit US Or Canadian part number(s) into the field and click on the Search button.
If entering more than one five-digit part number, please separate by a comma. For example: 25224,25218,24010,27010
US Part Number: 84201 Canada Part Number: N/A
Permatex® 5 Minute Gap Filling Epoxy
Versatile, easy-to-use, general purpose epoxy adhesive is two-part adhesive and filler system that eliminates the need for welding or brazing. Sets in five minutes, no clamping needed. Clear appearance. Fills gaps and will not shrink. Resistant to water and solvents. Temperature range -60°F to 180°F (-51°C to 82°C). Permanent strength up to 3400 PSI. Self-mixing dual syringe (84164) blends the adhesive and filler as it dispenses, eliminating the need for manual mixing.
Buy Online: Permatex® 5 Minute Gap Filling Epoxy
84201
1 oz. tubes, carded
1 oz. tubes, carded
Automobile
Suggested Applications: Ideal for complex, multi-piece assemblies. Bonds rigid materials including, ceramic, chrome, fabric, fiberglass, glass, hard plastic, metal and rubber.
| US Item # | CDN Item # | Container Size | Case |
|---|---|---|---|
| 84201 | N/A | 1 oz. tubes, carded | 12 |
DIRECTIONS:
- PROTECT: Work area must be protected from accidental spills.
- CLEAN: Surfaces must be clean, dry and free of grease and oil.
- PREPARE: Roughen smooth surfaces (using abrasives or sandpaper)
- OPEN PACKAGE: Remove tubes and use the back of cap or a sharp point to puncture seals.
- DISPENSE: Squeeze tubes to dispense resin and hardener. Thoroughly mix resin & hardener on a clean, discardable surface for 2 to 3 minutes until evenly colored.
- APPLICATION: Apply a small amount of mixture to both surfaces and assemble parts immediately (product sets in 4-6 minutes).Remove any excess epoxy immediately.
- CURE TIME: Usable strength is reached in four hours at72°F (22°C). Cooler temperatures may require longer set time.
- CLEAN-UP: Attach nozzle caps and store in molded tray.
NOTE: Adhesive will not bond most polyethylene or polypropylene plastics.
print