src=

PRODUCTS

US Part Number: 84101
Canada Part Number: 84111

Permatex® 5 Minute Gel Epoxy

Category:

Permatex’s General Purpose 5 Minute Gel Epoxy provides the flexibility to reposition before the setting time. The fast setting, two-part adhesive and filler system is specially formulated with a Blue Dye Indicator that disappears when it’s fully mixed and ready to use. The advanced gel formulation reduces mess and waste compared to traditional epoxies; unique indicator system takes the guesswork out of “ready to use”.

  • Non-drip formula allows for mess free application
  • Can easily be applied to overhead and hard to reach places
  • Sets in just 5 minutes / Cures in 10
  • Blue dye indicator disappears when epoxy is ready to apply
  • No clamping required
  • Bonds to metals, hard plastics, ceramics and more!
  • PSI Strength: 3,400

Automobile

Suggested Applications: Ideal for complex, multi-piece assemblies. Bonds rigid materials including, ceramic, chrome, fabric, fiberglass, glass, hard plastic, and metal and rubber.

US Item # CDN Item # Container Size Case
8410184111.84 fl. oz. dual syringe, carded 6
US Item # Tech Doc File
84101 TDS  SDS #1  SDS #2  

DIRECTIONS:

  1. PROTECT: Work area must be protected from accidental spills.
  2. CLEAN: Surfaces must be clean, dry and free of grease and oil.
  3. PREPARE: Roughen smooth surfaces (using abrasives or sandpaper).
  4. OPEN PACKAGE: Remove syringe. Using a sharp blade, cut off tips of both nozzles.
  5. DISPENSE: Depress plunger to dispense resin and hardener. Thoroughly mix resin & hardener on a clean, discardable surface for 2 to 3 minutes until evenly colored.
  6. APPLICATION: Apply a small amount of mixture to both surfaces and assemble parts immediately (product sets in 4-6 minutes).Remove any excess epoxy immediately.
  7. CURE TIME: Usable strength is reached in four hours at72°F (22°C). Cooler temperatures may require longer set time.
  8. CLEAN-UP: Attach nozzle cap and store in molded tray.

NOTE: Adhesive will not bond most polyethylene or polypropylene plastics.

print instruction print