Tech Documents Search
Type the appropriate five-digit US Or Canadian part number(s) into the field and click on the Search button.
If entering more than one five-digit part number, please separate by a comma. For example: 25224,25218,24010,27010
US Part Number: 51813 Canada Part Number: 51850
Permatex® Anaerobic Gasket Maker
OEM specified. Noncorrosive gasketing material designed primarily for use on aluminum, iron, and steel flanged mating surfaces. Ideal for on-the-spot and emergency repairs, or when a conventional gasket is unavailable. Fills gaps up to .015″ and cures to a solvent-resistant seal that will not tear or decay during service. Parts disassemble easily even after extended service. Old gasket material can be removed in minutes with a simple putty knife.
Buy Online: Permatex® Anaerobic Gasket Maker
51813
50 ml tube, carded
50 ml tube, carded
51817
6 ml tube, carded
6 ml tube, carded
51845
300 ml cartridge
300 ml cartridge
Automobile
Suggested Applications: For use on machined aluminum metal components; transmission pans, transmission case covers, transaxle casings, transfer cases, split crankcases, pumps, and housings.
Motorcycle
Suggested Applications: Suggested For use on machined aluminum metal components; transmission pans, transmission case covers, transaxle casings, axle covers, gear cases, split crankcases, pumps, housings, and with oring replacement.
Heavy Duty
Suggested Applications: Case covers, power divider shaft housings, input/output power shafts, PTO covers to housing, cover housing gasket, differential, assembly to rear axle housing, power dividers, axle shaft flanges
Marine
Suggested Applications: Crank case flanges drive unit joints, and with o-ring replacement
| US Item # | CDN Item # | Container Size | Case |
|---|---|---|---|
| 51813 | 51850 | 50 ml tube, carded | 6 |
| 51817 | N/A | 6 ml tube, carded | 12 |
| 51845 | 51845 | 300 ml cartridge | 10 |
| US Item # | Tech Doc File |
|---|---|
| 51813 | TDS SDS Canada part # SDS |
| 51817 | TDS SDS |
| 51845 | TDS SDS Canada part # SDS |
TO MAKE A GASKET:
- Clean both flange surfaces. Remove paint, dirt, grease or old gasket completely.
- Spray Permatex® Surface Prep™ activator on one surface only. Allow to dry 1-2 minutes.
- Apply a continuous bead of sealant to the unprimed surface.
- Assemble mating surfaces with minimal lateral movement. Excess sealant can be wiped awaywith a cloth and shop solvent.
TO DRESS A GASKET:
- Clean both flange surfaces. Remove paint, dirt, grease or old gasket completely.
- Spray Permatex® Surface Prep™ activator to both flange surfaces. Allow to dry 1-2 minutes.
- Completely cover both sides of the precut gasket with sealant.
- Place coated gasket on flange, and assemble mating surfaces with minimal lateral movement.
print