Tech Documents Search
Type the appropriate five-digit US Or Canadian part number(s) into the field and click on the Search button.
If entering more than one five-digit part number, please separate by a comma. For example: 25224,25218,24010,27010
US Part Number: 27038 Canada Part Number: N/A
Permatex® OPTIMUM RED Gasket Maker
Permatex’s New Optimum Red RTV gasket maker provides maximum temperature performance up to 750°F intermittent. The advanced formulation allows for a sensor-safe, low odor and non-corrosive performance and is resistant to oil and common shop fluids. Permatex® Optimum Red also resists aging, weathering and thermal cycling without hardening, shrinking or cracking.
- Maximum temperature performance, adhesion, and flexibility
- Sensor-safe, low odor and non-corrosive
- Non-flammable and non-toxic
- OEM Specified and meeting performance specs of OE silicone gaskets
- Maximum Temperature performance up to 750°F (399°C) intermittent
Applications: Header, Exhaust Manifold, Turbocharge, Slip-fit Exhaust
| US Item # | CDN Item # | Container Size | Case |
|---|---|---|---|
| 27038 | N/A | 3.35 oz. Tube | 12 |
| 27138 | N/A | 8 oz. Power Bead | 6 |
| 27238 | N/A | 13 oz. Cartridge | 12 |
- For best results, surfaces should be clean and dry.
- Cut nozzle and apply a continuous 1/16″ to 1/4″ (2 to 6mm) bead of silicone to one surface, surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange.
- Let dry for one hour then tighten to torque specifications.
- Allow 24 hours to fully cure before filling with fluids or returning to service.
- Replace cap after use.
NOTE: Not recommended for use on head gaskets or parts in contact with gasoline.
print