PRODUCTS
US Part Number: 25223 
Make leak-proof gaskets and return equipment to service immediately! Permatex premier instant gasket maker was designed as a replacement for conventional gaskets. This elastomeric “formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. Formulated to meet or exceed performance standards for long-term salability, durability and handling, this material is used on OEM production lines and specified in their service parts programs. Temperature range -75°F to 450°F (-59°C to 232°C) continuous, 500°F (260°C) intermittent; resists ATF, coolant, oil and other shop fluids. Sensor-safe. Fleet-tested.
Suggested Applications: Automotive, heavy duty, and marine gaskets, valve covers, gearbox covers, pumps, oil pans, thermostat housings, water pumps.
Suggested Applications: Transmission housing cover, clutch release cover
Suggested Applications: Valve covers, oil pan, case covers, power divider shaft housings, input/output power shafts, PTO covers to housing, cover housing gasket, differential, assembly to rear axle housing, power dividers, axle shaft flanges
| US Item # | CDN Item # | Container Size | Case |
|---|---|---|---|
| 25223 | N/A | 4 oz. Power Can | 6 |
| 85224 | 26015 | 7.5 oz. PowerBead™ pressurized can | 6 |
| 29208 | 30874 | 5 oz. cartridge | 6 |
| 33694 | 30876 | 10.1 fl. oz. cartridge | 6 |
| 25224 | N/A | 7 oz. Power Can | 6 |
| US Item # | Tech Doc File |
|---|---|
| 25223 | TDS SDS |
| 85224 | TDS SDS Canada part # SDS |
| 29208 | TDS SDS Canada part # SDS |
| 33694 | TDS SDS Canada part # SDS |
| 25224 | SDS |
Clean and dry parts. Push nozzle to dispense the Right Stuff®. Apply a continuous 1/8″ to 1/4″ bead to one surface, surrounding all bolt holes. Assemble parts within five minutes, tightening bolts to recommended torque levels. Material will fill any surface imperfection. Equipment can be returned to service immediately. To reuse package, leave a 1/2″ length of material extending out of the nozzle. Cured material will form a protective plug. To reuse, carefully remove the plug and dispense as before.
NOTE: Not for use as a head gasket or on parts in contact with gasoline.
printType the appropriate five-digit US Or Canadian part number(s) into the field and click on the Search button. If entering more than one five-digit part number, please separate by a comma. For example: 25224,25218,24010,27010
