src=

PRODUCTS

US Part Number: 34628
Canada Part Number: N/A

Permatex® The Right Stuff® Red 90 Min Gasket Maker

The Right Stuff® Red 90 Minute RTV Gasket Maker is the only high temperature gasket maker in a tube that can quickly return a vehicle to service just 90 minutes while maintaining reliable and long lasting seals. The Right Stuff® Red 90 minute is a premium professional grade gasket maker for today’s fast-paced professional garage and heavy DIY’er with high temperature performance up to 650°F intermittent

  • High temperature performance, adhesion and flexibility with a fast return to service time
  • Reliable and long-lasting seals
  • Sensor-safe, low odor and non-corrosive
  • The Right Stuff 90 Minute is the only Right Stuff available in a tube
  • High Temperature performance up to 650°F (343°C) intermittent
  • Top Applications: Header, Manifold, Slip-Fit Exhaust Parts, Turbocharge

Applications: Header,  Exhaust Manifold, Turbocharge, Slip-fit Exhaust

US Item # CDN Item # Container Size Case
34628N/A3 oz. Tube 12
US Item # Tech Doc File
34628 SDS  
  1. For best results, surfaces should be clean and dry.
  2. Cut nozzle and apply a continuous 1/16″ to 1/4″ (2 to 6mm) bead of silicone to one surface, surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange.
  3. Let dry for one hour then tighten to torque specifications.
  4. Allow 24 hours to fully cure before filling with fluids or returning to service.
  5. Replace cap after use.

NOTE: Not recommended for use on head gaskets or parts in contact with gasoline.

print instruction print