Tech Documents Search
Type the appropriate five-digit US Or Canadian part number(s) into the field and click on the Search button.
If entering more than one five-digit part number, please separate by a comma. For example: 25224,25218,24010,27010
US Part Number: 81630 Canada Part Number: N/A
Permatex® Ultra Red® Gasket Maker
Permatex’s Ultra Red RTV Gasket Maker is designed to meet the needs of high temperature repairs. This OEM specified gasket maker is sensor-safe, low odor, non-corrosive, and meets performance specs of OE silicone gaskets. This advanced formula is resistance to high temperature and high adhesion while also remaining resistant to oils and common shop fluids.
- High temperature performance and adhesion
- Sensor-safe, low odor and non-corrosive
- OEM Specified and meeting performance specs of OE silicone gaskets
- High Temperature performance up to 650°F (343°C) intermittent
Applications: Header, Exhaust Manifold, Turbocharge, Slip-fit Exhaust
| US Item # | CDN Item # | Container Size | Case |
|---|---|---|---|
| 81630 | N/A | 3.35 oz. Tube | 12 |
| 81695 | N/A | 9.5 oz. Power Bead | 6 |
| 81624 | N/A | 13 oz. Cartridge | 12 |
- For best results, surfaces should be clean and dry.
- Cut nozzle and apply a continuous 1/16″ to 1/4″ (2 to 6mm) bead of silicone to one surface, surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange.
- Let dry for one hour then tighten to torque specifications.
- Allow 24 hours to fully cure before filling with fluids or returning to service.
- Replace cap after use.
NOTE: Not recommended for use on head gaskets or parts in contact with gasoline.
print