Tech Documents Search
Type the appropriate five-digit US Or Canadian part number(s) into the field and click on the Search button.
If entering more than one five-digit part number, please separate by a comma. For example: 25224,25218,24010,27010
US Part Number: 27828 Canada Part Number: 27829
Permatex® Heavy Duty Automotive Headliner Adhesive
High-strength spray adhesive designed for repairing interior parts which have become detached or loosened. Resistant to extreme weather conditions. Water-resistant. Dries clear for neat appearance. High temperature formula maintains high strength at temperatures up to 170°F (77°C). VOC compliant. Level 3
Buy Online: Permatex® Heavy Duty Automotive Headliner Adhesive
27828
20 oz. aerosol can, 16.75 oz. net. wt.
20 oz. aerosol can, 16.75 oz. net. wt.
Automobile
Suggested Applications: Headliners, carpets, trunk linings, and inside door panels.
Heavy Duty
Suggested Applications: Headliners, carpets, trunk linings and inside door panels
Marine
Suggested Applications: Excels at attaching boat upholstery cloth, carpeting, floor mats, insulation, kick and silencer pads to metal, wood or KB board
| US Item # | CDN Item # | Container Size | Case |
|---|---|---|---|
| 27828 | 27829 | 20 oz. aerosol can, 16.75 oz. net. wt. | 6 |
| US Item # | Tech Doc File |
|---|---|
| 27828 | SDS Canada part # SDS |
DIRECTIONS:
Product may attack some plastics or painted surfaces. Masking tape can be used to protect these areas, but should be removed immediately after application.
- Make sure all surfaces are clean, dry and free from any contaminates.
- Shake can before use.
- Turn nozzle to select spray pattern width; low, medium or high.
- Hold can 68 inches from work surface and apply 23 uniform overlapping coats. Allow a minimum of 5 minutes drying time between coats. Apply additional coats in opposite direction from first. For stronger bonds,apply adhesive to both surfaces.
- Allow adhesive to dry for 5 minutes, or until tacky, before setting.
- Press surfaces together with uniform pressure, eliminating air pockets. Bonds should be made within 30 minutes of application. Full cure is achieved in 24 hours at 70°F(21°C).
- To prepare can for next use, invert, and dispense until spray is free of adhesive.
print