Tech Documents
Type the appropriate five-digit US Or Canadian part number(s) into the field and click on the Search button. If entering more than one five-digit part number, please separate by a comma. For example: 25224,25218,24010,27010
US Part Number: 24010 Canada Part Number: 24215
Permatex® Medium Strength Threadlocker BLUE Gel
OEM specified. Gel formula provides “liquid-reliability” without drips, globs, mess or waste. Available in three convenient sizes, the GEL TWIST™ pin-point applicator, the GEL SQUEEZE™ applicator, or the single-use pouch puts the Threadlocker right where you want it…on the part! All-purpose, medium strength threadlocker. Ideal for all nut and bolt applications 1/4″ to 3/4″ (6mm to 20mm). Eliminates need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly. Conforms to ASTM D 5363 AN0321 (Mil-S-46163A, Type II, Grade N).
Buy Online: Permatex® Medium Strength Threadlocker BLUE Gel
24010
10 g GEL TWIST™ applicator, carded
10 g GEL TWIST™ applicator, carded
24005
5 g GEL SQUEEZE™ applicator, carded
5 g GEL SQUEEZE™ applicator, carded
Automobile
Suggested Applications: Valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts, carburetor studs; also ideal for vertical applications.
Motorcycle
Suggested Applications: All frame mounting bolts
Heavy Duty
Suggested Applications: Starter mounts, alternator mounts, engine mounting bolts
| US Item # | CDN Item # | Container Size | Case |
|---|---|---|---|
| 24010 | 24215 | 10 g GEL TWIST™ applicator, carded | 6 |
| 24005 | N/A | 5 g GEL SQUEEZE™ applicator, carded | 6 |
| US Item # | Tech Doc File |
|---|---|
| 24010 | TDS SDS Canada part # SDS |
| 24005 | SDS |
DIRECTIONS FOR USE:
Parts should be clean and oil free.
- Remove protective cap.
- Turn dial to expose 1/8″ to 1/4″ of material beyond tip.
- Apply threadlocker to leading edge of male fitting,covering 5 to 6 threads. Avoid direct contact of tip to metal surface*.
- Assemble parts and tighten to recommended torque.5. Replace protective cap.*If contact occurs, expose 1/16” of material and wipe off with a clean towel.Temperature range: -65°F to 300°F (-54°C to 150°C).Refer to Technical Data Sheet for complete information.
NOTE: Permatex® Threadlocker Gel should not be used on plastic fittings. Do not use on food contact surfaces.Avoid food contamination during use and storage.
print