Permatex® Black Plastic Welder , 25 ML

DIRECTIONS: 1. PROTECT: Work area must be protected from accidental spills. 2. CLEAN: Surfaces must be
clean, dry and free of grease and oil. 3. PREPARE: Roughen smooth surfaces (using abrasives or sandpaper). 4. Remove the plastic tab from the tip of both nozzles. 5. Depress plunger on syringe to dispense Part A and Part B. Thoroughly mix on a clean, disposable surface for at least 1 minute or until uniform in color. 6. Apply to surfaces being repaired. Assemble parts immediately. Remove excess adhesive immediately. 7. Allow bond to set for 8-10 minutes before moving or handling. Product fully cures within 24 hours.