DIRECTIONS: Product may attack some plastics or painted surfaces. Masking tape can be used to protect these areas, but should be removed immediately after application. 1. Make sure all surfaces are clean, dry and free from any contaminates. 2. Shake can before use. 3. Hold can 6-8 inches from work surface and apply 2-3 uniform overlapping coats. Allow a minimum of 5 minutes drying time between coats. Apply additional coats in opposite direction from first. For stronger bonds, apply adhesive to both surfaces. 4. Allow adhesive to dry for 5 minutes, or until tacky, before setting. 5. Press surfaces together with uniform
pressure, eliminating air pockets. Bonds should be made within 30 minutes of application. Full cure is achieved in 24 hours at 70°F (21°C). 6. To prepare can for next use, invert, and dispense until spray is free of adhesive.
1High-strength spray adhesive designed for repairing interior parts which have become detached or loosened
2Resistant to extreme weather conditions
3Dries clear for neat appearance
4High temp formula maintains high strength at temperatures up to 170°F (77°C)
5VOC compliant
