DIRECTIONS: Clean and dry parts. Cut nozzle to apply a continuous 2 to 6 mm (1/16″ to 1/4″) bead. A 3 mm (1/8) bead is sufficient in most applications. Activate PowerBead® by twisting nozzle counterclockwise one complete revolution. This will raise trigger. Depress trigger to dispense. On first use, allow a second or two for the valve and nozzle to self-prime before product actually dispenses. Regulate pressure and flow by varying depression angle. Apply bead to one surface only, surrounding all bolt holes and evenly dispensing around entire circumference. Assemble parts within five minutes, tightening bolts to recommended torque levels. Material will fill any surface imperfection. Equipment can be returned to service immediately. After use, simply wipe excess material from applicator’s nozzle and replace plastic cap with a °Click.
NOTE: Not for use as a head gasket or on parts in contact with gasoline.
1Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
2Sensor-safe, non-corrosive, RTV silicone
3Protects against leaks caused by vibration and thermal expansion
4Meets performance specs of OE silicone gaskets
5Quickly returns vehicle to service in just 1 minute
