DIRECTIONS: 1. For best results, clean and dry all surfaces with a residue-free solvent, such as Permatex Brake and Parts Cleaner. 2. Cut nozzle to desired bead – gaskets are best formed using a 1/16″ to 1/4″ (2 to 6 mm) bead. 3. Apply a continuous and even bead of silicone to one surface; surround all bolt holes. Assemble parts immediately. Finger tighten bolts until material begins to squeeze out around flange. Allow to cure for one hour then retighten 1/4 to 1/2 turn. 4. For best results, allow to cure overnight. 5. Replace cap after use. Clean hands with dry cloth or Permatex Fast Orange Hand Cleaner. Clean tools with non-flammable cleaning fluid. NOTE: Not recommended for use on head gaskets or parts in contact with gasoline.
1Withstands the harsh detergents and additives found in automatic transmission fluid
2Formulated to resist aging, weathering, and thermal cycling without hardening, shrinking or cracking
3Improves transmission oil resistance and provides good adhesion while retaining flexibility
4Sensor-safe, non-corrosive, non-flammable, non-toxic, low odor sealant
5May be used as a gasket maker or dressing
