Tech Documents Search
Type the appropriate five-digit US Or Canadian part number(s) into the field and click on the Search button.
If entering more than one five-digit part number, please separate by a comma. For example: 25224,25218,24010,27010
US Part Number: 34423 Canada Part Number: N/A
Permatex® The Right Stuff® Red 1 Minute
The Right Stuff® Red Gasket Maker is the only high temperature gasket maker that can quickly return a vehicle to service in just 1 minute. This thick formula maintains reliable and long-lasting seals. The Right Stuff Red 1 minute is superior to most OE gaskets and provides premium professional grade gaskets for today’s fast paced professional garages. Temperature performance up to 650°F intermittent, this gasket maker is sensor-safe and resists oil and other common shop fluids
- High temperature performance and adhesion with a fast return to service time
- Reliable and long-lasting seals
- Sensor-safe, low odor and non-corrosive
- Thickest formula available
- High temperature performance up to 650°F (343°C) intermittent
Buy Online: Permatex® The Right Stuff® Red 1 Minute
34424
10 oz. Cartridge
10 oz. Cartridge
34425
5 oz Cartridge
5 oz Cartridge
34426
7.5 oz. Power Bead
7.5 oz. Power Bead
Applications: Header, Manifold, Slip-Fit Exhaust Parts, Turbocharge
| US Item # | CDN Item # | Container Size | Case |
|---|---|---|---|
| 34423 | N/A | 3 oz. Power Can | 6 |
| 34424 | N/A | 10 oz. Cartridge | 6 |
| 34425 | 30878 | 5 oz Cartridge | 6 |
| 34426 | N/A | 7.5 oz. Power Bead | 6 |
- Surfaces should be clean and dry. Cut off tip of cartridge.
- Attach nozzle, cut at 45 degree angle at desired point and insert cartridge into a caulking gun.
- Apply a continuous 1/16″ to 1/4″ (2 to 6 mm) bead to one surface, surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange.
- Let dry for one hour then tighten to torque specifications. Allow 24 hours to fully cure before filling with fluids or returning to service.
- To reuse package, leave 1/2″ length of material extended from nozzle; cured material will form a protective plug. To reuse, carefully remove the plug and dispense as before.
NOTE: Not recommended for use on head gaskets or parts in contact with gasoline.
print