Permatex® Home Fiberglass, Porcelain & Plastic Repair Kit 90217

1. Drain or reduce fluid level below damaged area.
2. Remove all fluids, film, tar, grease, oil etc. From repair surface.
3. Thoroughly roughen, clean, and dry all surfaces to be repaired.
4. Sand one inch beyond the damaged area with enclosed sandpaper. For cracks that may continue to creep, drill small hole at both ends.
5. Cut fiberglass reinforcement cloth to cover damage (for small nicks or chips fiberglass reinforcement cloth may not be required).
6. Mix two-part epoxy pouch as follows:

For repairs using the WHITE only:

1. Firmly apply pressure to lower half of two-part epoxy pouch to burst center seam.
2. Knead contents together until mixture is uniform in color (mix for at least 1 minute).
3. Cut corner of mixed epoxy pouch and pour epoxy into package tray and go to step #7 below.

For repairs using the ALMOND:

1. Cut corner of almond dye pouch and pour into package tray.
2. Firmly apply pressure to lower half of two part epoxy pouch to burst center seam.
3. Knead contents together until mixture is uniform in color (mix for at least 1 minute).
4. Cut corner of mixed epoxy pouch and pour epoxy into package tray with almond dye and mix together with provided brush until uniform almond color is achieved. Go to step #7 below.

 Continued

7. Spread the epoxy mixture in a uniform layer with brush on the area.
8. Place fiberglass over damaged area.
9. Spread the remaining mixture over the fiberglass with brush until completely saturated.
10. Taper the edges of the repair area beyond the fiberglass. REPAIR IS NOW COMPLETE.