DIRECTIONS:
NOTE: Exhaust system must be cool before applying putty.
1. Wire brush or sand to remove loose rust and dirt. Repair area must be clean.
2. Wrap wet bandage (sticky surface on pipe) around damaged area. Overlap bandage
at least 1/2 inch. Force bandage into small cracksit molds and conforms easily.
3. Support bandage with wire.
4. Run motor at low speed or idle for 20 to 30 minutes. Bandage will harden to a rock
hard, super protective shield.
1Complete kit for repairing cracks and splits in mufflers, tailpipes and exhaust pipes
2Withstands temperatures over 1000°F (540°C)
3Kit contains ready-to-use foil packed bandage and support wire
4Shock resistant
