DIRECTIONS: 1. Use gloves to prevent staining of
hands. 2. Scrape or wipe off dirt & oil. Sand with
coarse sandpaper or wire brush. 3. Should be used
when temperature is between 50° and 90°F (10°
and 32°C). Can be applied to surfaces which do not
exceed 200°F (93°C). 4. Shake well before using.
Spray a thin coat onto rusted surface 8-10 inches
away until surface is lightly and evenly coated.
5. Apply 2-3 thin coats, allowing no more than two
minutes drying time between coats. Final application
should dry to a black finish. 6. Allow 24 hours drying
time before topcoating. Water based finish topcoat
paints will require an additional non-water based
primer prior to aplication of topcoat. Protect from
moisture and humidity. For a smooth finish, sand
with 320 grit sandpaper before topcoating. 7. Clean
up with alcohol.
1One-step treatment seals and protects metal
2Encapsulates old rust and prevents new rust
3Fast-drying, black polymer coating
4Excellent protective primer
5Can be used when temperature is between 50°F and 90°F (10°C and 32°C)
