DIRECTIONS: 1. Use gloves to prevent staining of hands. 2. Scrape or wipe
off dirt & oil. Sand or wire brush rusted surface. 3. Shake well before using.
Pour a small amount of Permatex Rust Treatment into a separate disposable
container. Do not return unused material to bottle, or dip the applicator into the
original bottle, as contents may be prematurely activated. 4. Brush or sponge
on a thin layer using long thin strokes. Try to contain Rust Treatment to rusted
area being treated as product will stain surrounding paint. Remove splatters
with detergent and water immediately. 5. A black coating will begin to appear
in 15-30 minutes. Apply a second thin coat within 20 minutes, to produce a
uniform color. 6. Allow 24 hours protected from moisture before topcoating.
Acrylic latex finish paints require a solvent-based primer/sealer before painting.
Lacquer/enamel-base paints may be used without a primer. 7. Clean brushes
and other tools immediately after use with detergent/water. 8. For Automotive
Applications (NOT RECOMMENDED FOR AUTOMOTIVE EXTERIOR SHEET
METAL REPAIRS): Allow an extra 24 hours drying time to allow trapped
moisture to evaporate before topcoating. For a smooth finish, use sandable
primer and sand with 220 grit or finer sandpaper before topcoating.