DIRECTIONS: 1. Clean and dry parts using Permatex® Surface Prep® activator. 2. Shake tube of
Threadlocker well before each use. 3. Remove cap and snip nozzle tip. 4. Apply to threaded areas and
assemble parts. Refer to Technical Data Sheet for complete information. NOTE: Threadlocker works on
metal parts. It is not recommended for plastics. Cured product must be heated to 500° to 600°F (260°
to 316°C) before parts will separate.
1High temperature, high strength threadlocker for heavy-duty applications
2Prevents bolts and press fits 3/8" to 1 1/2" (10mm to 38mm) from loosening due to shock, severe vibration and heat stress
3Exclusive formulation for newer engines and high performance applications
4Suited for temperatures up to 450°F (232°C)
5Removable with heat and hand tools
