DIRECTIONS: 1. Clean and dry parts using Permatex Surface PrepTM
activator. 2. Shake tube of Threadlocker well
before each use. 3. Remove cap and snip nozzle tip. 4. Apply Threadlocker to threaded areas and assemble parts.
Refer to Technical Data Sheet for complete information. NOTE: Threadlocker works on metal parts. It is not
recommended for plastics. Cured Threadlocker must be heated to 500°F (260°C) before parts will separate.
1Permanent, high strength product that is applied to fasteners 3/8" to 1" (10mm to 25mm)
2Designed for securing parts that must withstand heavy shock, vibration, or extreme chemical or environmental conditions
3Localized heating and hand tools are required to separate parts
4Protects threads from rust and corrosion
5OEM specified
