DIRECTIONS: 1. Clean and dry parts using Permatex Surface Prep®. 2. Apply to both parts and assemble
with a turning motion. 3. Parts fixture within 1 hour and are fully cured after 24 hours. 4. Refer to Technical
Data Sheet. NOTE: Works on metal parts. It is not recommended for plastics. To disassemble, weaken by
heating above 500F (260C); then use presses or pullers to separate components.
1High strength, medium viscosity anaerobic adhesive for slip fit assemblies
2Provides 2,800 PSI shear strength on steel
3Fixtures in 10 minutes at room temperature
4OEM specified
