TO MAKE A GASKET:
1. Clean both flange surfaces. Remove paint, dirt, grease or
old gasket completely.
2. Spray Permatex Surface Prep® Activator on one surface only.
Allow to dry 1-2 minutes.
3. Apply a continuous bead of sealant to the unprimed surface.
4. Assemble mating surfaces with minimal lateral movement.
Excess sealant can be wiped away with a cloth and shop solvent.
TO DRESS A GASKET:
1. Clean both flange surfaces. Remove paint, dirt, grease or old
gasket completely.
2. Spray Permatex Surface Prep® Activator onto both flange
surfaces. Allow to dry 1-2 minutes.
3. Completely cover both sides of the pre-cut gasket with sealant.
4. Place coated gasket on flange and assemble mating surfaces with
minimal lateral movement.
1Ideal for on-the-spot and emergency repairs, or when a conventional gasket is unavailable
2Fills gaps to .015"
3Cures to a solvent-resistant seal that will not tear or decay during service
4Parts disassemble easily even after extended service
5Old gasket material can be removed in minutes with a putty knife
