DIRECTIONS:
For light duty and semi-permanent assemblies:
1. Apply Permatex High Tack®to both surfaces; allow to dry until “tacky.”
2. Press parts into position. Avoid stress on bonded parts for 3 hours.
For heavy-duty and permanent assemblies:
1. Apply Permatex High Tack®to both surfaces; allow to dry until “tacky.”
2. Reapply to base surface and bond immediately. Avoid stress on bonded
parts for 3 hours.
3. Remove excess material with lacquer thinner
(Do not use lacquer thinner on painted surfaces).
1Tough, pliable sealant and bonding agent
2Superior alternative to weather strip adhesive
3Holds gaskets in place during positioning and assembly
4Non-hardening for easy disassembly
5Resists engine fluids including diesel fuels and synthetic oils
