Permatex® Medium Strength Threadlocker Blue Gel, 10 G

DIRECTIONS FOR USE:
Parts should be clean and oil free.
1. Remove protective cap.
2. Turn dial to expose 1/8″ to 1/4″ of material beyond tip.
3. Apply threadlocker to leading edge of male fitting,
covering 5 to 6 threads. Avoid direct contact of tip to
metal surface*.
4. Assemble parts and tighten to recommended torque.
5. Replace protective cap.
*If contact occurs, expose 1/16″ of material and wipe off with a clean towel.
Temperature range: -65°F to 300°F (-54°C to 150°C).
Refer to Technical Data Sheet for complete information.
NOTE: Permatex Threadlocker Gel should not be used
on plastic fittings. Do not use on food contact surfaces.
Avoid food contamination during use and storage.